LED T8 Tubes in 4 foot lengths is an ideal replacement lighting for retail stores, office buildings, hospitals, schools, warehouses, etc. Replace old, inefficient T12 and T8 fluorescent bulbs with the energy efficient LED T8 tubes. Update your ceiling and canopy lighting with LED T8 tubes 4ft.

Tired of replacing ballasts and fluorescent tubes every 2 years? Looking to upgrade to energy efficient, long lasting LED? Call for pricing toll free 1-844-LED PROS (1-844-533-7767)

Fully Compliant with ARRA Buy American requirements – Manufactured in the U.S.A. with U.S. and imported components 

LED T8 Tubes

	LED T8 Tubes 4ft Featuring 360 PCS High Output LED’s; Up to 15 years Maintenance free operation and a 5 Year Warranty. Design Lights Consortium (DLC) qualified product listing. Available in 20w, 26w.
	LED T8 Tubes 4ft MasterFit Featuring a unique design which allows for compatible use with any Instant Start T8 Ballast with no rewiring involved. These tubes can also be used without an electronic ballast and wired directly to 120-277VAC power source. Featuring 360 PCS High Output LEDs and up to 105 lumens per watt. Available in 18w.
	LED T8 Tubes 4ft Dimmable  featuring a frosted lens allows for an evenly illuminated glow resembling existing fluorescent tubes.  Dimming controlled with a standard Analog Dimmer. Available in 20w, 26w.
	LED T8 Tubes 4ft High Output by Neptun Light LED T8 Linear Tubes 4ft are ideal replacement lighting for 4ft fluorescent tubes most commonly seen in classrooms, medical buildings,office spaces, retail spaces and warehouse lighting.  Replacement of existing T12 fluorescent lighting. Available in 26W.
	LED T8 Tubes 4ft High Output 347VAC Compatible by Neptun Light Features self-ballasted design; High Output LEDs with > 100 lm/w; Compatible with 120-347VAC power source used primarily in Canada. Available in 18W.
	LED T8 Tubes 4ft 260 Degree Beam Glass Lens by Neptun Light featuring 360 PCS High Output LEDs; 260° Beam optimizes fixtures with reflectors; Frosted non yellowing glass lens for even glow. (Glare Free). The beam angle of a lamp is the angle at which the light is distributed or emitted, see Beam Angle Guide. Available in 18w.
	LED T8 Tubes 4ft 260 Degree Beam Polycarbonate Lens by Neptun Light featuring 360 PCS High Output LEDs 260° Beam optimizes fixtures with reflectors; Frosted non yellowing polycarbonate lens for even glow. (Glare Free). available in 18w.
	LED T8 Tubes 4ft Retrofit Kits by Neptun Light featuring 360 PCS High Output LEDs; designed for the replacement of existing T8 fluorescent lighting systems; The LED driver wires the same as Instant Start T8 ballasts for fast and easy installation. Dimming option. Available in 20W.
	LED T8 Tubes 4ft Direct Indirect Lighting by Neptun Light Double sided optics for direct / indirect lighting systems. Available in 20w, 26w, 32w.

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

On December 19, 2007, President George Bush signed into law the Energy Independence and Security Act (EISA) that changed the landscape for common incandescent lamps (Incandescent Lamp Phase Out) and the people who use them. The comprehensive EISA includes increased fuel efficiency standards for new automobile fleets (to 35 mpg by 2020), updated efficiency standards for electric motors, and requirements for federal agencies to reduce their energy consumption by 30% by 2015.

Incandescent Lamp Phase Out

The biggest documented energy saver in EISA, however, is the set of standards for common incandescent light bulbs requiring them to use about 25% to 30% less energy than today’s lamps—and at least 60% less energy by 2020. Specifically, EISA mandates a phase out of the least efficient general service incandescent lamps through a combination of wattage caps and minimum efficiency performance standards. These phase outs begin January 1, 2012 (referring to date of manufacture) for lamps with higher lumens and wattage, and they progress until 2014.

A 2007 federal law calls for manufacturers to cease making these products beginning January 1, 2012.

What Are The Regulations?

When interpreting product legislation and regulations, it is critical to understand how the government defines a particular regulated product. In other words, if a product doesn’t fit the definition, it isn’t regulated. In EISA, a general service incandescent lamp is very specifically defined:

It has a filament (which means both incandescent and halogen versions are covered by the law).

It has a medium screw base.

If it is clear, inside frosted, or soft white, it produces between 310 and 2600 lumens.

It is an A shape; it is a G (globe shape) less than or equal to 5″ in diameter and greater than 40 watts; or it is a B, S, F, CA, or BA shape greater than 40 watts.

It is line voltage capable of operating between 110 and 130 volts.

Just as important is to know what this regulated lamp is not; for example, it is not a three-way lamp; it is not a low voltage lamp; it is not a colored lamp (red or blue for example); it is not 150 watts; and it is not a rough service, appliance, or vibration service lamp.

One more thing: the EISA standards for general service incandescent lamps do not apply to compact fluorescent or LED replacement lamps. The law presumes those technologies will be suitable energy efficient replacements for less efficient incandescent (or halogen) lamps, 

What Does This Mean For Purchasing? 

Facility managers (fms) who are using general service incandescent lamps in their buildings already know there are more energy efficient replacements on the market. But, beginning in 2012, decisions about alternatives will be front and center. Fms will need to be keenly aware of the choices available to them and should know how each choice can be expected to perform.

Here are a few tips for successfully navigating the transition from general service incandescent lamps.

Lumens. More than ever, it will be important to know that light output is not measured in watts; it is measured in lumens. For a given lumen output desired for an application, the fewer watts one can find to deliver those lumens, the more efficacious the lamps will be and the more energy that will be saved—provided fms install controls to limit use appropriately.

Technology Options

a. Halogen. As a kind of “souped up” incandescent, halogen replacement lamps are about 25% more efficient than standard incandescent and are easily dimmable. Rated life ranges from slightly longer to three times longer.

b. Compact fluorescent (CFL). This type of lamp provides about three to four times the efficiency of an incandescent. There are dimmable versions, but fms should ask the lamp manufacturer for a list of compatible dimmers. CFLs contain a small amount of mercury to ensure efficient operation, so in many states they are subject to proper disposal regulations at end of life.

c. Light emitting diode (LED). These solid-state products provide three to four times the efficiency of an incandescent lamp and a far longer life. There are dimmable versions, but like CFLs, it is important to obtain a list of compatible dimmers from the LED lamp manufacturer (see sidebar for more on LED lighting).

Incandescent lighting is undergoing a major transformation. Fms who identify their various options now will be prepared well in advance of regulatory deadlines.

By Pamela Horner. Read the entire article

Act Now! Replace your dull and inefficient fluorescent lamps with energy efficient LED replacement lamps for both new and retrofit construction.Call Steve at 661.305.3332 or email “The Next Generation Lighting Expert” at steve@lightbulbsunlimited.org 

If you’re looking for “follow links” and back links this site has activated comment luv, do follow, keyword luv and top commentators.

This is a quick way to get excellent back links to your site in exchange for quality comments on this site.

Comments are always appreciated. The purpose of the comment section is to add value by making on topic comments about the content of the post or maybe a comment on a comment left by someone else. The comment section can also be use to engage the blog owner in a dialogue

Note: All comments are moderated and all low quality comments are deleted.

Just add a good, solid comment to the original article and your comment will be approved.

Here’s what I think, if someone takes the time and effort to leave a good comment on my blog, why shouldn’t they get something in return, SEO reward for you and more content for me. It’s a win-win

Commenting on a blog that has CommentLuv activated, you receive Luv, back to your blog. Commonly used plugins allow you to give and receive true link Luv. You give LUV to those that comment on your blog and you receive it when you comment on someone’s blog.